MemberLogin∶ User  Pass 
WebMail Contact us Favorite Chinese
Product show >> Nospray Shields >>   
Name Spec Size
 Nospray Shields  各种规格  

NoSpray® Shields


Meets SOLAS Regulation II - 2/15.2.11

NoSpray® Shields are designed to contain the spray of hazardous liquids in vessel engine rooms, a cause of dangerous fires and loss of life and property.

NoSpray® Shields are manufactured in multiple layers from a silicone rubber applied on a silica fibre fabric, specially formulated to withstand high temperatures and pressures, and an aluminum foil lining, which creates a corrosion resistant barrier for long lasting protection.

NoSpray® Shields are available in various widths which can be cut to size for use on flanges, valves, fittings, or any irregular shaped surface which can leak hazardous liquids. NoSpray® Shields encapsulate the protected surface and are easily installed using our drawstring system. Removable, reusable and extremely durable, NoSpray® Shields provide a consistent, clean look in vessel engine rooms.

NoSpray Shields product specifications chart





4“ Roll for typical flanges on a 25 mm (0.5”) to 50 mm (1”) pipe diameter
6” Roll for typical flanges on a 50 mm (1”) to 100 mm (2”) pipe diameter
12” Roll for typical flanges on a 100mm (2”) pipe diameter and up

NoSpray Shields assembly cutaway

Installation Instructions:

1.) Measure the outside diameter of the flange and cut the NoSpray Shield to a length of 130%.
2.) Cut a small hole about 1” (25mm) from each end of the shield on the pocket.
3.) Centre the shield on the flange and wrap snugly, overlapping the ends.
4.) Thread a lacing wire through each of the two cut holes and pull the lacing wire through the pockets.
5.) Draw together and fold under the cut edge of Shield for a neat finish.
6.) When pulled together snugly, secure with pliers and cut off excess wire.

Click count:4177  Input time:2008-5-30 【Print Page】【Return】【top】  
Product List
Marine Gas Monitor
Marine aluminum foil fiber tape
Marine Marking Tape/ Marine Identification Tape
PetroWrap Anti-Corrosion Tape
Nospray Shields
Exowrap Insulation System
Nospray Protective Tape
Address:No.4 Building,No.5 Shenglong Road, Jiuting Town, Songjiang Districit, Shanghai, China Tel:86-021-54167383
copyright (c)2005-2006 All rigths reserved